Customization: | Available |
---|---|
After-sales Service: | Engineers Available to Service Machinery Overseas |
Warranty: | 1 Year |
Still deciding? Get samples of US$ 100/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Automatic Construction Concrete Cement AAC block Making Machine ALC Panel Plant
What is AAC Block & ALC Panel?
ine![]() |
![]() |
Advatages of AAC block / alc panel produce by Hongfa Ytong Technology AAC Production Line
1.Light weight and high strength
The weight of ALC products is 1/3--1/10 of the traditional material department, which effectively reduces the weight of the buiding and improves the seismic resistance of the buiding.
2.Fire retardant
AAC products are A1 grade non-combustible materials, and the fire resistance limit of 100mm thick AAC wall can reach 4hours.
3.Green rnvironmental protection
The raw materials and finished products of AAC products are inorganic materials, which are non-toxic and harmless throughout the life cycle, and are truly green and environmentally frinedly new buiding materials.
4.Soud insulation and sound absorption
AAC products have the dual performance of sound insulation and sound absorption, and theri weighted sound insulation can rach 40-60dB when used as a wall, which fully meets the sound insulation requirments of buildings.
5.Precise dimensions
The error of high-quality AAC products is only ±1mm, which provides a reliable guarantee for high-precision and high-efficiency assembly construction.
6.Waterproof and impermeable
The inside of AAC products is closed and non-connected pores, and special construction technology and supporting materials are used to effectively prevent water penetration.
7.Thermal insulation
The dry thermal conductivity of AAC products is 0.055-0.17w/(m*k), which can efectively improve the energy saving level of buildings and reduce energy consumption compared with other wall materials.
8.Safe and durable
After autoclaving, the product has stable performance and good durabiblity.
9.keeping temperature
aerated concrete panel has many porous,the delivery hearting coefficient is 0.9-0.22W/(mk),the same as 1/4 or 1/5 of clay brick,so it is best materials now in the world. Also many kinds raw material,have lowest wasteMain Material:coal ash sand waste mine material coal stone,stone dust and other silicon materials.
Application of AAC Block & ALC Panel:
Autoclaved Aerated Concrete Block are widely used as external wall panel (exterior wall panel), internal wall panel (interior wall panel), partition wall panel, flooring, roofing, fence, cladding, curtain wall and facade etc.
Autoclaved Aerated Concrete Block are widely used in different kinds of buildings, such as public facilities, industrial constructions, steel structure building, warehouse, workshop, stores, hospitals, hotels, apartments, villas, schools, supermarkets etc.
1.Ball Mill:grinding sand to slurry
Type
|
Diameter
|
Length
|
Productivity
|
Power
|
Φ1200x4500mm
|
1200
|
4500
|
3-4ton/h
|
55kw
|
Φ1500x5700mm
|
1500
|
5700
|
6-8ton/h
|
130kw
|
Φ1830x7000mm
|
1830
|
7000
|
8-17ton/h
|
245kw
|
Φ2200x9000mm
|
2200
|
9000
|
20-70tons/h
|
380kw
|
In the Aerated concrete block peoduction , the slurry mixed by pouring mixer pured into mould, after maintenance in curing room, it can cutting the aerated concrete green body.
Mould Parameter:
Size (m) | Size of body(peeling-off size) (mm) | Maximum pverall size (mm) | ||||
Length | Width | Height | Length | Width | Height | |
4.2*1.2*0.6 | 4200 | 1200 | 600 | 4720 | 1735 | 1078 |
4.8*1.2*0.6 | 4800 | 1200 | 600 | 5320 | 1735 | 1078 |
6.0*1.2*0.6 | 6000 | 1200 | 600 | 6550 | 1750 | 1085 |
3.Pouring Mixer:
The pouring mixer is mainly to make measured the slurry . Ash and aluminum suspending liquid into mixing drum ,the pouring slurry after mixed will be poured into mould through discharge Butterfly valve to make maintenance, the machine adopts lelical blade in draft tube for mixing tyoe, it can make kinds of materials mixing uniformity effectively.
The parameter of pouring mixer:
Mixing Type | Motor power | Mixing volume | Blade diameter | Blade speed |
Draft tube | 30kw | 3.6 m3 | φ560mm | 560r/min |
Draft tube | 37kw | 4.5 m3 | φ630mm | 560r/min |
4. Cutting Machine Parts:
Working principle of cutting machine: The tilting hanger turns the mould 90 degrees in the air , demoulds the blank and puts it on the cutting table together with the side plate . The blank on the cutting table is cut by the longitudinal cutting device through the motor and its own running . After completion and running at the pause position , the blank is cut horizontally by the cross cutting device when it is driven by the motor to the center of the blank . The cross cutting holder drops and cuts vertically from up to down until it is reset upward .
Technicla Parameter of Horizontal Cutting Machine:
Size | Min Specing of Wries | Range of Oscillation | Diameter of Cutting Wire (mm) | Outline Dimensions (mm) | ||
Length | Width | Height | ||||
4.2*1.2*0.6 | 10mm | 7.5 | φ0.6-1.0 | 5200 | 3200 | 3560 |
4.8*1.2*0.6 | 10mm | 7.5 | φ0.6-1.0 | 5900 | 3200 | 3560 |
6.0*1.2*0.6 | 10mm | 7.5 | φ0.6-1.0 | 7200 | 3200 | 3560 |
Technicla Parameter of Vetical Cutting Machine:
Size | Min Specing of Wries | Diament of Cutting Wire (mm) | Outline Dimensions (mm) | |||
for horizintal cutting | for side trimming | Length | Width | Height | ||
4.2*1.2*0.6 | 5mm | φ0.6-0.8 | φ0.8 | 5500 | 2860 | 2500 |
4.8*1.2*0.6 | 5mm | φ0.6-0.8 | φ0.8 | 5500 | 2860 | 2500 |
6.0*1.2*0.6 | 5mm | φ0.6-0.8 | φ0.8 | 6500 | 2860 | 2500 |
General specification of aac blocks / brick
L |
W |
H |
600 |
100 120 125 150 180 200 240 250 300 |
200 240 250 300
|
Packing: Naked packing or stretch film packing or according to customers' requirements
Delivery time: Within 30 days after receipt of deposit and moulds confirmation from buyer
1.Guarantee for one year and after sale service for whole life.To offer free design,free technology support and free machine maintenance trainning.
2.We will provide you with a set of spare parts for free!
Hongfa Group Established in 1990.
A leader developer& Manufacturer of Construction Material Machinery.
Main business Range & Products:
Lightweight Panel Production Line, AAC Block Production Line, Full Automatic Concrete Block Production Line, Artificial Quartz Plate Production Line, Concrete Pipe Machine, Concrete Tile Machine, Concrete pipe machine, Bidirectional Hydraulic Brick Maker, Mining Machinery, Concrete Batching plant, Stereo Parking Equipment, etc.
Hongfa Strengths
More than 33 years experience. 1500 employee (50+engineers)
2) Total 4 factories with 440,000M2 and annual sell above USD100 Million .
3) 10,000 customers and fulfillment to over 120 countries.
4) Continuous service and logistics system.
5) High quality products and competitive price.We hope we can cooperate with each other and establish a win-win business relationship.
Contact me to get more details and free quote.
Foreign trade department:Poppy Jiang
Guangxi Hongfa Heavy Machinery Co., Ltd. (Since 1990, more than 34 years experience!)
Poppy: +86 18031925793
Factory add.: Yilingyan Industrial Zone, Nanning city, Guangxi province, China
aac block making machine aac panel sand ash aac block plant manufacturer