Customization: | Available |
---|---|
After-sales Service: | Engineer Go to Install or Video Guide |
Warranty: | 1 Year |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Lightweight sandwiched wall panel providing a solid structure and
superior quality wall finishes to ensure a straight and smooth wall after completion.
They can be used as either a standard structural wall panel, or as a retaining wall section, depending on the requirement on site. The reinforcement steel and foundation detail will alter, depending on the use of the wall panel.
Main machine parts for
Sound Insulation Lightweight EPS Cement Sandwich wall panel machine/ eps wall panel machine Lightweight Wall Panel Making Machine /Precast Concrete Wall Panel Machine/Wall Board making Machinery/acoustic wall panel making machine
Main part for complete EPS wall panel production line Eps wall panel system for
solid or hollow panel lightweight wall panel
1. Mixing plant
HONGFA mixing plant consists of mixer, movable infusion unit and aggregating system. It can mix all raw material automatically and record every data for production. 3.6CBM capacity mixer guarantees infusion efficiency. It only needs about 15seconds to finish a panel with size 2440*610*100mm.
2. EPS Expander
EPS expander is used for expanding raw polysterene, one-time expander can make EPS around 15-18kg/CBM, interval expander can get proportion on 9-11kg/CBM.
3. De-molding machine
Demolding machine can pull the cured panels out deirectly, Hongfa design it based on 6 years panel manufacturing experience, make it possible that demolding machine is movable, after demolding, the molds can be installed immediately without any
delay.Multiwork is possible so efficiency is triple compared to traditional vertical manual and semi horizontal production line.
4. Recycling unit
Recycling unit can save eveything in production, waste slurry settling in underground mixer, the cement and sand will be
pumped into mixer again for next mixing cycle. Keep production clean and make waste recycling, cost saving.
5. Hollow core panels unit
If you want hollow core wall panels with thickness above 150mm, HONGFA offers complete system solution. Hollow panels
usually use for roof, cladding etc. purpose without any bearing demand.
6. Movable slurry piston pump unit
This unit uses for movable hydraulic slurry infusion, after mixing all raw material in mixer, then slurry pours into this movable
container, it can mix and inject at same time, guarantee slurry not falling down or the heavier material(sand or cement)
seperates from lighter(EPS) one.
Hongfa provide main 3 kinds of EPS wall panel machine :
1. Automatic double side opening wall panel machine main data:
Moulding Machine Parameter and Productivity | |||||||
Overall dimensions(mm) | Power(KW) | Output / Pieces per mould | |||||
60mm | 75mm | 90mm | 100mm | 120mm | 150mm | ||
3380*3200*2680 |
4 |
40pcs | 36pcs | 32pcs | 30pcs | 26pcs | 22pcs |
HFP530A full automatic lightweight concrete wall panel system is Hongfa patent product, for 15 sets molding machine, total production line only needs 5 workers, labor density and intensity is low.
1.Full Automatic
2.Eco Saving and Advanced Technology
3.Low cost and high capacity
4. Easy operation
5. Essy maintainence
6.Adopts touch screen control, automatic filling, electronic weighing, temperature control, material level control to realize automatic production.
Position | Amount(Person) |
Moulding/pouring | 1 |
Demoulding&Packing | 1 |
EPS Expander Operation/raw materials | 1 |
Mixer Operation | 1 |
Transportation | 1 |
Total | 5 |
Successful Kinds of EPS cement sandwich panel making machinery machine
♥ Automatic Vertical Hydraulic & Manually Type Production Line
♥ Horizontal Wall Panel Production Line
Workshop and shipping Lightweight wall panel production line