| Customization: | Available |
|---|---|
| After-sales Service: | Field Installation, Commissioning and Training |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Hot Sale Automatic Light Weight EPS Wall Panel Machinery Cement Sandwich Panel Making Machine Precast Wall Panel Production Line for House Building Price
Advantages of the Precast Concrete Board,EPS Insulating Cement Wall Panel
1.Light weight(400-700kg/m3)
2.Cost Saving(reducetion in steel 27%,cement 20%)
3.Earthquake resistant
4. High Strength(about 4.0MPa)
5.Water Barrier
Advantage of Hongfa Wall Panel Production Machine
A leader developer& Manufacturer of Construction Material Machinery.
1. Patent protected product
2. Labor-saving and Advanced Technology
3. Double side opening and higher capacity
4. ISO9001-2015
5.Adopts touch screen control, automatic filling, electronic weighing, temperature
control, material level control to realize automatic production.
6. Easy to maintainence, Easy to clean.
HONGFA Machines
Hongfa group since 1990.
We provide kinds of Lightweight Building Material Precast Concrete Wall Panels Machines for Prefab House EPS Foam Concrete Wall Panels Making.
1.Hongfa automatic vertical concrete EPS sandwith wall panel making machine.HFP530A(Double side)
| Specifications | ||||||
| Production capacity of one mold cars EPS Cement panel plant as per thickness and size of the panels. Model HFP530A | ||||||
| According to length X width:2440*610mm | ||||||
| Thickness | Pieces/mold car | m2/mold car | Mold car Qty | m2/day | m2/year (300days) | |
| 60mm | 40 | 59.5 | 1 | 59.5 | 17,850 | |
| 75mm | 36 | 53.5 | 1 | 53.5 | 16,050 | |
| 90mm | 32 | 47.6 | 1 | 47.6 | 14,280 | |
| 100mm | 30 | 44.6 | 1 | 44.6 | 13,380 | |
| 120mm | 26 | 38.6 | 1 | 38.6 | 11,580 | |
| 150mm | 22 | 32.7 | 1 | 32.7 | 9,810 | |
| Charging Volume | 5m3 | |||||
| finished wall panel dimension | 2440*610*60/75/90/100/120/150mm | |||||
| hydraulic unit motor power | 2.2-5.5kw /mold car | |||||
| Size of machine | 3380*3200*2680mm | |||||
| installed capacity | 65-80kw | |||||
| Advantage of Hongfa HFP530A | ||||||
| 1.Independent research and development by Hongfa company | ||||||
| 2.High Yield | ||||||
| 3.Fast pouring | ||||||
| 4.The finished wall panel strong and beautiful | ||||||
| 5.Low labor intensity | ||||||
| 6.Need less labor | ||||||
| 7.easy to use/operating . | ||||||
| 8.Panel installation, easy and quick installation of mold frame | ||||||
2.Hongfa manual vertical EPS concrete lightweight wall panel making machine.HFP540M(one size)
| Specifications | ||||||
| Production capacity of one mold cars EPS Cement panel plant as per thickness and size of the panels. Model HFP540M | ||||||
| According to length X width:2440*610mm | ||||||
| Thickness | Pieces/mold car | m2/mold car | Mold car Qty | m2/1 shif | m2/year(300days) | |
| 60mm | 58 | 86.33 | 1 | 86.33 | 25,899 | |
| 75mm | 50 | 74.42 | 1 | 74.42 | 22,326 | |
| 90mm | 42 | 62.51 | 1 | 62.51 | 18,753 | |
| 100mm | 40 | 59.54 | 1 | 59.54 | 17,862 | |
| 120mm | 34 | 50.61 | 1 | 50.61 | 15,183 | |
| 150mm | 28 | 41.68 | 1 | 41.68 | 12,504 | |
| finished wall panel dimension | 2440*610*60/75/90/100/120/150mm | |||||
| Size of machine | 3600*1320*2800mm | |||||
| installed capacity | no | |||||
| Advantage of Hongfa HFP540M | ||||||
| 1.High Yield | ||||||
| 2.Fast pouring | ||||||
| 3.The finished wall panel strong and beautiful | ||||||
| 4.easy to use/operating . | ||||||
| 5.Less investment,,price of machien cheap . | ||||||
3.Hongfa horizontal EPS concrete lightweight wall panel making machine.HFP512A(one size)
| Specifications | ||||||
| Production capacity of one mold cars EPS Cement panel plant as per thickness and size of the panels. Model HFP512A | ||||||
| According to length X width:2440*610mm | ||||||
| Thickness | Pieces/mold car | m2/mold car | Mold car Qty | m2/1 shif | m2/year (300days) | |
| 60mm | 16 | 23.81 | 1 | 23.81 | 7,143 | |
| 75mm | 14 | 20.84 | 1 | 20.84 | 6,252 | |
| 90mm | 12 | 17.86 | 1 | 17.86 | 5,358 | |
| 100mm | 11 | 16.37 | 1 | 16.37 | 4,911 | |
| 120mm | 10 | 14.89 | 1 | 14.89 | 4,467 | |
| 150mm | 8 | 11.91 | 1 | 11.91 | 3,573 | |
| Advantage of Hongfa HFP512A | ||||||
| 1.high strength | ||||||
| 2.Fast pouring | ||||||
| 3.The finished wall panel strong and beautiful | ||||||
| 4.easy to use/operating . | ||||||
| 5.Low labor intensity | ||||||
Process of Wall Panel Making
Main Part for Complete Production Line
1.Mixing Plant
HONGFA mixing plant consists of mixer, movable infusion unit and aggregating system. It can mix all raw material automatically and record every data for production. 3.6CBM capacity mixer guarantees infusion efficiency. It only needs about 15seconds to finish a panel with size 2440*610*100mm.
2.EPS Expander
EPS expander is used for expanding raw polysterene, one-time expander can make EPS around 15-18kg/CBM, interval expander can get proportion on 9-11kg/CBM.
3.De- Molding Machine
De-molding machine can pull the cured panels out deirectly, Hongfa design it based on 6 years panel manufacturing experience, make it possible that demolding machine is movable, after demolding, the molds can be installed immediately without any delay.
Multiwork is possible so efficiency is triple compared to traditional vertical manual and semi horizontal production line.
4.Recycling Unit
Recycling unit can save eveything in production, waste slurry settling in underground mixer, the cement and sand will be pumped into mixer again for next mixing cycle. Keep production clean and make waste recycling, cost saving.
5.Hollow Core Panels Unit
If you want hollow core wall panels with thickness above 150mm, HONGFA offers complete system solution. Hollow panels usually use for roof, cladding etc. purpose without any bearing demand.
6.Movable Slurry Piston Pump Unit
This unit uses for movable hydraulic slurry infusion, after mixing all raw material in mixer, then slurry pours into this movable container, it can mix and inject at same time, guarantee slurry not falling down or the heavier material(sand or cement) seperates from lighter(EPS) one.
Raw Material of the Wall Panel
1)Outside(with side board or without)
-Calcium silicate board,Cement Fiberboard, MGO board
-Also can be without the side board and adjustable
2)Inside(core material)
-Cement,Foam EPS, Fly Ash, Sawdust, Perlite, Stone, Additivies.etc
Hongfa One Lightweight Precast Concrete Wall Panel Making Machine, Sandwich Wall Panel Production Line, Fiber Cement Wall Board Machine Line Can Produce kinds of Wall Panels and Concrete Slabs
Common Size of EPS cement wall sandwich panel
2440mm*610mm*50/60/75/90/100/120/150/180/200/250mm,other size such as length 3000mm, 3200mm, 3500mm, 4000mm can be customized .
EPS Wall Panel Applications
The Eps panel is widely used for partition board in non-bearing wall,exterior wall in steel structure,roof and floor.
It is popular for new construction or renovation and expansion building,such as house construction,fire wall,fences,footings,retaining walls,bungalows high-rise buildings,basements,walk-in fridges,hotels,schools,shopping malls,villas and etc
Our Sucessfull plant
We have many succeed production line inside and outside the country of China , Such as ..............
Packaging & Shipping
Packing: Naked packing or stretch film packing or according to customers' requirements(We will send machine with plastic film package,parts with wooden case,if need, fumigation wooden carton also available.)
Our Service
| Pre-sales Service |
| (1) Professional suggestions (raw material matching, machine selection, the condition of building factory, |
| feasibility analysis for brick machine production line) |
| (2) Device model choice (recommend the best machine according to the raw material, capacity and the size of brick) |
| (3) 24 hours on-line service |
| (4) Welcome to visit our factory and production line anytime. |
| (5) Introduce the company file, product categories and production process. |
| (6)Sample testing support. |
| In Sale |
| (1) Update the production scheduling in time |
| (2) Quality supervision |
| (3) Product acceptance |
| (4) Shipping on time |
| After-sale |
| (1) Training how to instal the machine, training how to use the machine. |
| (2) Engineers available to service machinery overseas. |
| (3) Recall clients regularly ,get feedback in time,keep well communication with each other |
FAQ
When you plan to purchase a certain machine, suggesting to take care below points:
1. Does this brand has good reputation and sell well in the market?
A:we got good reputation and are the biggest supplier in China
2. What is the materials they used? Manganese steel or A3 steel?
A:We use Manganese steel which stronger than A3 steel
4. What is the lifetime of the mold?
A our mold can use 900,000 - 1200,000 times, more than 10 years life
5.What is the guarantee period?
A: We guarantee for one year
6.The price cover to what equipment?
A: pls refer to our quotation list
Send your inquiry in details, feel free to Click the"Contact now"!
Contact information:
Foreign Trade Dept:Fiona Yao
Guangxi Hongfa Heavy Machinery Co.,Ltd
Wetsite:https://hongfamachine888.en.made-in-china.com
){kind=link}