Multipro Roof and Wall Panel Machine Fireproof Moisture Proof EPS Cement Panel Molding Machine and Production Line

• Customization: Available
• After-sales Service: Yes
• Warranty: 1 Year Free, After That Paid Service
• Model NO.: HF512A
• Automatic Grade: Automatic
• Power Source: Electric
• Screw Design: Other
• Certification: CE, ISO
• Condition: New
• Customized: Customized
• Name: Wall Panel Machine
• Length of Wall Panel: Customized
• Capacity: 50, 000-1000, 000m2 / Year
• Thickness of Wall Panel: 50mm- Customized
• Length of Panel: 2440mm, 3000mm, and Other Size Customized
• Material: EPS, Sand, Cement, Water, Additives, etc
• Automatic: Automatic
• Type: Automatic Vertical Type
• Brand: Hongfa
• Transport Package: Customized
• Specification: 3830*2600*3130(mm)
• Trademark: Hongfa
• Origin: Guangxi, China (Mainland)
• HS Code: 8474802000
• Production Capacity: 50 Sets / Month

Product Description

Multipro Roof and Wall Panel Machine Fireproof Moisture Proof EPS Cement Panel Molding Machine and Production Line

Hollow slabs, wide in production range, convenient to assemble and demould, less in workers, low in labor intensity of workers, high in product yield and accurate in appearance and size. The bedroom mould machine adopts hydraulic opening and closing mould high precision numerical control cutting equipment to ensure the accuracy of product specifications and dimensions. Compared with traditional industry equipment, it is fuller in pouring core material and more convenient to install demoulding shift.

*Light weight----Excellent sound insulation----- Heat Insulation
*Waterproof Fire proof----- Energy Efficient Environmental
*Convenient construction-----High Intensity without deformation.
*It has a solid,lightweight, thin body, high strength, impact resistance, strong hanging capacity, heat insulation, sound insulation, fireproof, waterproof, easy to cut, slot, no need to slap, dry work, environmental protection, etc., widely used in construction.
Summer Wei                   008614797711211

Main Features

1. Including feeding, foaming, screening, crushing and conveying to the curing bin are automatically completed;

2. primary and secondary pre-foaming devices are arranged, and the foaming density is 8-40g/L;

3. Configure Japan pressure relief valve to control steam stability;

4. Stainless steel barrel and chrome-plated stirring rod to ensure equipment quality;

5. In the aspect of electrical appliance control, well-known brands at home and abroad are adopted, with more stable performance.
 

Common Specifications of EPS cement wall sandwich panel and capacity
 

Wall Panel Machine Molding Car Parameter and Productivity
Over all dimension	Power(kw)	Output / panels quantity per molding car
4380*3200*2680mm	5.5kw	60mm	75mm	90mm	100mm	120mm	150mm	Customized size
		56pcs	48pcs	42pcs	40pcs	34pcs	28pcs	-
3580*3200*2680mm	4kw	40pcs	36pcs	32pcs	30pcs	26pcs	22pcs	-

 

Other size such as length 3000mm, 3200mm, 3500mm, 4000mm can be customized .
Capacity : 50,000-1,000,000M2/ Year
 

General raw materials of wall panels

1.Cement 2.Fly ash 3. Ceramsite or gypsum or EPS 4.Sand 5.Additives
6.With or without panels (calcium silicate board or cement fiberboard)

Suggested Staffing Table of Lightweight Foam Dry Partition EPS Wall Panel Making Machine Sandwich Panel Press Machine :

Position	Amount(Person)
3 Moulding/pouring	1
Demoulding&Packing	1
EPS Expander Operation/raw materials	1
Mixer Operation	1
Transportation	1
Total	5

Summer Wei 008614797711211

HONGFA Wall Panel and Molding Car Details
Applicated panel types	EPS concrete solid panel & hollow panel, gypsum panel, foam panel. It can be with or without calcium silicate board and fiber cement board.
Panel usage on construction	Interior wall, exterior wall, roof, floor etc.
Panel raw materials	Cement, EPS, sand, water, latex powder, water reducer, fiber cement board.
Panel density	500-800kg/CBM, you can control density via adjusting formulas.
Panel length/width	Length usually is 2000,2270,2440,2700,2800,2850,3000mm etc based on requirements. Popular width is 600mm and 610mm.
Thickness	60, 75, 90, 100, 120, 150, 200,250mm etc.
Strength of panel	3-6Mpa.
Size of machine	3580*3200*2680mm/ other customized size

Summer Wei 008614797711211
Other Main Machine of The Production Line of Wall Panels:
1. Mixing and pouring platform
HONGFA mixing plant consists of mixer, movable infusion unit and aggregating system. It can mix all raw material automatically and record every data for production. 3.6CBM capacity mixer guarantees infusion efficiency. It only needs about 15seconds to finish a panel with size 2440*610*100mm.

2. EPS Expander
EPS expander is used for expanding raw polystyrene, type A one-time expander can expands EPS about 14-18kg/CBM, type B interval expander can expands EPS about 10-13kg/CBM

Summer Wei 008614797711211

3.Demolding Machine
Demoulding machine can pully the cured panels out directly, Hongfa design it based on 6 years panel manufacturing experience. Make it possible that demoulding machine is movale, after demolding, the molds can installed immediately without any delay. Multiwork is possbile so efficiency is triple to traditional vertical manual and semi horizontal production line.

4. Waste recycle pool
Recycling unit can save everything in production, waste slurry in underground mixer, the cement and sand will be pumped into mixer again for next mixing. Keep production clean and make waste recycling, cost saving.

^{5. Hollow core panels unit
If you want hollow core wall panels with thickness above 150mm, HONGFA offers complete system solution. Hollow panels usually use for roof, cladding etc. purpose without any bearing demand.}
Summer Wei 008614797711211

^{6. Movable slurry piston pump unit
This unit uses for movable hydraulic slurry infusion, after mixing all raw material in mixer, then slurry pours into this movable container, it can mix and inject at same time, guarantee slurry not falling down or the heavier material(sand or cement) seperates from lighter(EPS) one.}
Summer Wei 008614797711211

Finished panel of lightweight wall panel production line:

Summer Wei 008614797711211

Installation Instructions

Company Profile

Hongfa Group Since 1990

1. More than 30 years experience. 1500 employee (50+engineers)
2. 4 factories with 440,000m2 and annual sell above USD100 Million.
3. 10,000 customers in over 120 countries.
4. Continuous service and logistics system.
5. High quality products and competitive price.

Main Products :
Full automatic cement tile production line
Stone scrucher production line
Concrete block machine
EPS Light weight concrete / gypsum wall panel machine
AAC block production line
Concrete batching plant
Artificial quartz slab plate production line
Calcium Silicate Board / fiber cement board Production Line
Concrete wall panel making machine
Concrete terrazzo tile machine andconcrete pipe machine
EPS insulation concrete block production line. etc.

Automatic Block Making:
QT12-15D QT12-15 QT10-15D QT10-15 QT9-15 QT8-15D
QT6-15D QT6-15C QT4-15D QT4-15C QT4-20C QTJ4-25
Semi-automatic:
QTJ4-35B2 QTJ4-40B2
Semi-automatic egg-laying machine:
QTY4-30 QMJ4-45 QTJ2-45 JMQ-6A JMQ-10A JMQ-12A
Color Paver Color tile/ cement roof tile forming machine:
QT3-20 SMY8-150 SMY610
HF-800 pipe-making machine HF-2000 pipe-making machine
Concrete Mixing Plant:
HZS25 HZS35 HZS50 HZS60 HZS series
AAC Block production line : 50000~500000m³/Year
Fiber cement board/ calcium silicate board production line : 3-10 Million M2/Year
Summer Wei 008614797711211
Summer Wei 008614797711211

Certifications

1.One of Top Ten Influential Brands in China Brick &Tile Industry
2.China National Enterprise Abiding By Contract & Keeping Good Faith
3.Quality and Credibility of the Dual-protection Demonstration Unit
4.High and New Technology Enterprise
5.Famous Trademark of China
6.Star Enterprise with China Patent
7.AAA Grade Credit Enterprise
8.Consumer Satisfaction Unit
9.One of Top 100 building Material Industry Brands of China
10.One of Top Ten Good Faith Units
11.Advanced Exporter in Guangxi Province
12. Advance Quality Management Unit

Packaging & Shipping

FAQ

Q: Are you manufacturer or trading company?
A: We are one of biggest drect factory in West-South of China with more than 20+ agents in domestic market, the quality and after-sale services is guaranteed as we are Chinese Trustworthy Old Brand machinery enterprise since 1990s.

Q: How long is the warranty of your equipment?
A: For the core components of the main machine, we provide 1 year guarantee, but the exist machine of our customer's, they have operating for more than 10 years, it still runing without problems.

Q: Can this machine make other size product?
A: All along we insist on inovating and developing new equipments for construction building industrial, we are available to design and do the mould according to customer's Drawing or as ours.

Q: When do you delivery the goods?
A: Normally 30 days after receipt of deposit and moulds confirmation from Buyer.

Q: What about the payment?
A: 30% as down deposit by T/T ,70% as the balance paid by T/T before loading(L/C is also acceptable).

Q: What does the total price include?
A: After some simple communication, we will make the plan according to you target onCapacity and budget. Then we will send the accurrate quotation for you shortly.

Q: Would you mind provide the video?
A:The factory inspection detail and the precast concrete wall panel machine operating vedio is available to send to you, please contact us by any way you like, we are available for 24-hour service.